-
Based-on FT232RL USB to Serial TTL-level UART converter chip
-
Single chip USB to asynchronous serial data transfer interface.
-
Entire USB protocol handled on the chip - No USB-specific firmware programming required.
-
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and all parity.
-
Fully assisted hardware or X-On / X-Off software handshaking.
-
Data transfer rates from 300 baud to 3 Megabaud (RS422 / RS485 and at TTL levels) and 300 baud to 1 Megabaud (RS232).
-
256 byte receive buffer and 128 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.
-
Full UART pin configuration includes TxD, RxD, DTR, DSR, RTS, CTS, DCD and RI
-
Get power from USB bus and supply power to external not over 100mA
-
Jumper to select the logic level between +3.3V and +5V
-
Interface with any microcontroller to communication iwth computer via USB port.
-
Support the Virtual COM port. Programmer can create the popular visual programming tools such as Visual BASIC, Visual C or Borland Delphi.
-
The latest driver can download from http://www.ftdichip.com