USB PC OSCILLOSCOPE AND SIGNAL GENERATOR
Features
- function generator:
- crystal-based stability
- standard waveforms: sine, square and triangle
- predefined library waveforms included: sine(x)/x, sweep, ...
- oscilloscope:
- auto set-up function and X10 option
- pre-trigger function
- readouts: True RMS, dBV, dBm, p to p, Duty cycle, Frequency…
- persistence options: colour graded, variable and infinite
- transient recorder:
- automatic storage of data
- automatic recording for more than 1 year
- record and display of screens
- bode plotter:
- automated sync between oscilloscope and generator
- logarithmic scale option
- Volt or dB display scale
- phase plot option
- spectrum analyser:
- linear or logarithmic timescale
- operating principle: FFT (Fast Fourier Transform)
- FFT input channel: CH1 or CH2
- zoom function
- in the box:
- getting started manual
- USB PC Scope+generator unit
- USB cable
Specifications
- general:
- markers for: amplitude/voltage and frequency/time
- input coupling: DC, AC and GND
- supply from USB port (500mA)
- dimensions: 100 x 100 x 35mm / 3.9 x 3.9 x 1.4"
- function generator:
- amplitude range: 200mVpp to 8Vpp @ 1KHz// no load
- vertical resolution: 8 bits
- square wave rise/fall time: 0.3µs
- sample rate: 25MHz
- typical sine wave distortion (THD): < 1%
- output impedance: 50ohm
- frequency range: from 0.5Hz to 500KHz (sine 1MHz)
- oscilloscope:
- bandwidth: two channels DC to 12 MHz ±3dB
- input impedance: 1 Mohm / 30pF
- maximum input voltage: 30V (AC + DC)
- time base: 0.1µs to 500ms per division
- input range: 10mV to 3V/division
- input sensitivity: 0.3mV display resolution
- record length: 4K samples / channel
- sampling frequency: 250Hz to 25MHz
- transient recorder:
- timescale: 20ms/Div to 2000s/Div
- max record time: 9.4hour/screen
- max. number of samples: 100/s
- min. number of samples: 1 sample/20s
- bode Plotter:
- voltage range: 10mV, 30mV, 0.1V, 0.3V, 1V, 3V
- frequency range: 1KHz , 10KHz, 100KHz, 500KHz
- Frequncy start: 1Hz,10Hz, 100Hz, 1KHz, 10KHz, 100KHz
- spectrum analyser:
- frequency range: 0 .. 120Hz to 12MHz
- FFT resolution: 2048 lines
- minimum system requirements:
- IBM compatible PC
- Windows™ XP, Vista, 7 *
- SVGA display card (min.1024 x 768)
- mouse
- free USB port 1.1 or 2.0
|
