ARDUINO® KIT WORKSHOP BASE (WITH ARDUINO BOARD)

ARD-A000010

ARDUINO® KIT WORKSHOP BASE (WITH ARDUINO BOARD)

The Kit Workshop Base (with Arduino board) is a selection of all the components/parts necessary to participate in an introductory Arduino workshop.

List of components:
- 1 x Arduino Board Rev3
- 1 x straight single line pinhead connector 2.54 40x1
- 1 x breadboard, 840 tie points
- 1 set of 70 breadboard jumper wires
- 5 x 10 kohm resistor 1/4 W
- 5 x 2.2 kohm resistor 1/4 W
- 10 x 220 ohm resistor 1/4 W
- 5 x 330 kohm resistor 1/4 W
- 5 x 100 nF capacitor polyester
- 5 x 10 nF capacitor polyester
- 3 x 100 µF electrolytic capacitor 25 Vdc
- 1 x 4.7 kohm thermistor
- 1 x 70-100 kohm LDR VT90N2
- 3 x 5 mm red LED
- 1 x 5 mm green LED
- 1 x 5 mm yellow LED
- 1 x 10 kohm potentiometer, PCB terminals
- 2 x BC547 transistor in TO92 package
- 1 x buzzer
- 5 x PCB push button, 12 x 12 mm size
- 2 x 4N35 optocoupler DIL-6 package
- 2 x tilt sensor
- 1 x diode 1n4007
- 1 x MOS Irf520
- 1 x USB cable