Thursday, Mar 28th

Last update08:36:45 AM GMT

主頁 機械人產品及套件 ARDUINO 系列 Velleman ARDUINO ARDUINO® ETHERNET SHIELD REV3 WITHOUT PoE MODULE
Print
《Arduino機器人製作聖經》ARDUINO® MOTOR SHIELD REV3

ARDUINO® ETHERNET SHIELD REV3 WITHOUT PoE MODULE



Ask a question about this product

ARD-A000072

ARDUINO® ETHERNET SHIELD REV3 WITHOUT PoE MODULE

The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 Ethernet chip. The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. The Ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.

The R3 version brings to this shield the 1.0 standard pinout that consist in 4 additional pins: 2 of them placed near the AREF pin, that are used for TWI communication, and the other 2 are placed near the RESET pin. The IOREF pin is used to adapt the shield to the board on which is mounted. The last one is not connected and is reserved for future use.

The latest revision of the shield adds a microSD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Duemilanove and Mega (using the Ethernet library). It also adds a separate power-over-Ethernet (PoE) module that can be soldered to the board to provide power from a conventional twisted pair Category 5 Ethernet cable. It is IEEE802.3af compliant, and works with all compliant PoE injectors currently available.







Last Updated: Thursday, 28 March 2024 19:47